Rollotec; Specifications - Berker RolloTec Mode D'emploi

Connection of RolloTec
breakers (FI).
To avoid undesired tripping of the FI circuit breakers the two 'circuits' must not be
direct-coupled.
Use seperating relay.
36
® in installations using separate fault-current circuit

5. Specifications

Rated voltage : 230 V AC, 50 Hz, neutral conductor required
Switching capacity : one 1000 W motor max.
Relay output : 2 potential-carrying n. o. contacts (interlocked)
Pulse duration

RolloTec

® pushbutton : 2 minutes
RolloTec ® memory pushbutton : 2 minutes
RolloTec ® radio control pushbutton : 2 minutes
®
RolloTec clock timer attachment : 2 minutes standard,
1 second - 12 minutes learned
Switch-over time for cont. running : 1 second min.
(electronic locking by attachment)
Connecting terminals : screw-type
for 2.5 mm² max. or 2 x 1.5 mm²
1, 2, N, ,
Automatic cut-out : 16 A max.
, L
37