Berker RolloTec Mode D'emploi page 18

Connection of RolloTec
In case of wind alarm, the louver is moved up and remains there in a locked condition
until the wind ceases.
Such locking continues as long a an UP command is kept applied to extension input '2'.
Therefore, the louver cannot be operated manually or automatically.
Notes:
Glass breakage sensors must not be used together with the wind sensor.
The wind protection function (louver moves up) will be disabled after glass
breakage, the louver or roller blind remaining closed.
34
® with wind alarm. Connection of RolloTec ® with wind alarm (central control with two groups)
In case of wind alarm, the louver is moved up and remains there in a locked condition
until the wind ceases.
Such locking continues as long a an UP command is kept applied to extension input '2'.
Therefore, the louver cannot be operated manually or automatically.
Notes:
Glass breakage sensors must not be used together with the wind sensor.
The wind protection function (louver moves up) will be disabled after glass
breakage, the louver or roller blind remaining closed.
35