Function; Rollotec Insert With Rollotec Push-Button - Berker RolloTec Mode D'emploi

1. Function

Prog Zufall Astro
A Mo
Di The RolloTec
B Mi
C Do
Fr
Uhrzeit Sa
Datum W S So
box as per DIN 49073 (recommendation: deep box) in conjunction with
Mode Set
a RolloTec
or a RolloTec
Prog Zufall Astro
A Mo
Di
B
Mi
Do
C
Fr Thus, it is possible to implement manual control, comfort remote control, or fully
Uhrzeit Sa
Datum W S So
Mode Set automatic time control by just changing the attachment.
The RolloTec
This makes impossible powering the louver motor into both directions, thus avoiding
damage to it (please refer to the illustration).
An electronic locking of the attachment provides for a minimum change-over time of
Motor
1 second for continuous operation.
1
2 N L
Via extension inputs, mechanical push-buttons and further RolloTec
be connected. Extension input 2 ( ) can also be used for implementing a 'wind
alarm function'.
One motor provided with a limit switch and up to 1000 W max. can be actuated
L
per RolloTec
manufacturers.
22
® insert is a component of the RolloTec ® system and is installed in a
® clock timer attachment module
® pushbutton.
® insert has two efficient relay contacts locked against each other.
® insert. Please observe the information given by the motor
Attachment interface Sensor connection
1
2 N
Extension down
Extension up Motor down
® inserts can
Neutral
Motor
1
2 N L
The RolloTec ® insert has six connection terminals and one connector for
contacting the attachment.
In addition, a three-pole terminal (added to the attachment with sensor connection)
can be positioned in the insert. For flush-mounted installation and use of an
attachment with sensor connection, the sun protection/ twilight sensor (twilight
sensor only in conjunction with the timer) and/or the glass breakage sensor is
connected to this terminal.
L
Phase
Motor up
RolloTec ® insert with RolloTec ® push-button
In this combination, the RolloTec ® insert is operated as a manual push-button
(please refer to the 'Push-Button' Operating Instructions).
In addition, the following functions can be implemented:
- Connection of extensions.
- Wind alarm.
When the attachment with sensor connection is used:
- Glass breakage alarm.
- Sun protection function.
23