Maintenance And Service; Maintenance And Cleaning; After-Sales Service And Advice On Using Products - Bosch LR 7 Professional Notice Originale

20 | English
Practical Advice
Marking
You can mark the height of the laser beam using the centre mark (10) on the left and
right of the measuring tool when the beam runs through the centre of the reception field
(5).
Ensure that the measuring tool is aligned perfectly vertically (when using a horizontal
laser beam) or horizontally (when using a vertical laser beam) when marking as the
marks will otherwise be offset from the laser beam.
Attaching using a magnet (see figure B)
If an attachment is not required to be especially secure, then the measuring tool can be
attached to steel parts using the magnets (7).

Maintenance and Service

Maintenance and Cleaning

Keep the measuring tool clean at all times.
Never immerse the measuring tool in water or other liquids.
Wipe off any dirt using a damp, soft cloth. Do not use any detergents or solvents.

After-sales service and advice on using products

Our after-sales service responds to your questions concerning maintenance and repair of
your product as well as spare parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you with any questions about
our products and their accessories.
In all correspondence and spare parts orders, please always include the 10‑digit article
number given on the nameplate of the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange the collection of a product
in need of servicing or repair.
1 609 92A 4CS | (25.05.2018) Bosch Power Tools