Playing Audio From An External Device - Marantz professional PMD-526C Guide D'utilisation

Playing MP3 Files on a CD
To play MP3 files on a CD:
1. If the unit is off, press the Power button to power it on.
Important: Do not insert a CD when the power is off. Doing so may damage the unit. When powering on the unit,
hold the Eject button to engage Force Eject Mode.
2. Insert a CD into the CD slot. (Hold the edges of the CD without touching the recorded surface. Be careful not to
trap your fingers when the disc is drawn into the unit.)
3. Select CD as your desired media type: (described in
4. Select an audio file:
•
To move through audio files, press the |<</<< and >>/>>| buttons.
•
Press one of the Number buttons (0–9) to enter the desired track number. If the track number is two digits,
press the buttons in succession (e.g., 1 then 2 for Track 12).
In CD Mode, you can perform any of the following operations:
•
To start, resume, or pause playback, press the Play/Pause button.
•
To stop playback, press the Stop button.
•
To rewind or fast-forward through the track, press and hold one of the Search buttons. The track will
rewind/fast-forward at 5 times the normal playback speed. To resume playback, release the button.
•
To select a Repeat Playback mode, press the Repeat button. It will cycle through One
repeat indefinitely), Repeat Folder (the tracks in the current folder will repeat indefinitely), Repeat All
all tracks will repeat indefinitely) and Repeat Off (no tracks will repeat).
•
To select the Play Mode, press the Random button. It will cycle through Random
play in a random order [for up to 256 tracks]), Random Folder (the tracks in the current folder will play in a
random order) and Single Play () (the current track will play until its end and then stop.
•
To change the Time Mode in the display, press the Time button. It will cycle through Elapsed (how much time
has elapsed of the current track), Remaining (how much time remains of the current track), Total Elapsed Time
(how much time has elapsed of all remaining tracks), and Total Remaining (how much time remains of all
remaining tracks. This applies only to CDs.)
•
To eject a CD, press the Eject button. Ejecting will appear in the display while ejecting the CD. No Disc will
appear when there is no disc in the CD slot.

Playing Audio from an External Device

To play audio on an external device (e.g., smartphone, computer, portable music player, etc.) connected to
the Aux In:
1. If the unit is off, press the Power button to power it on.
2. Connect the 1/8" (3.5 mm) stereo/headphone output of your external device to the Aux In.
3. Select Aux as the media type (described in
connected, AUX Connected will appear in the display. If your external device is not connected, AUX
Disconnect will appear in the display.
4. To start playback, press the Play button on your external device.
Important: All buttons except for Power, CD/AUX/USB/BT/SD, and Eject will be locked/disabled.
Selecting the Media Playback
Selecting the Media Playback
Mode).
(the same track will
(the list of all tracks will
Mode). If your external device is
(the list of
9