Marantz professional PMD-526C Guide D'utilisation page 10

Playing Audio Files on a USB Flash Drive
To play audio files on a USB flash drive:
1. If the unit is off, press the Power button to power it on.
2. Connect your USB device (mass storage class) to the USB Port.
3. Select USB as your desired media type (described in
4. Select an audio file:
•
When a USB flash drive is first connected, files on the root directory will be shown. Press and hold the Folder
button to open to the first folder. All files within that folder will appear first. All other playable content on the flash
drive will appear after. To access another folder, press and hold the Folder button again.
•
To move through audio files, press the |<</<< and >>/>>| buttons.
•
Press one of the Number buttons (0–9) to enter the desired track number. If the track number is two digits, press
the buttons in succession (e.g., 1 then 2 for Track 12).
In USB Mode, you can perform any of the following operations:
• To start, resume, or pause playback, press the Play/Pause button.
• To stop playback, press the Stop button.
• To rewind or fast-forward through the track, press and hold one of the Search buttons. The track will rewind/fast-
forward at 5 times the normal playback speed. To resume playback, release the button.
• To change the view mode, press the Folder/Time button.
• To select another folder or audio file, follow the steps described in Step 4 above.
• To show different track information in the display, press the Text button. It will cycle through the file name, title,
album and artist.
• To select a Repeat Playback mode, press the Repeat button. It will cycle through Repeat One
repeat indefinitely), Repeat Folder (the tracks in the current folder will repeat indefinitely), Repeat All
tracks will repeat indefinitely) and Repeat Off (no tracks will repeat).
• To select the Play Mode, press the Random button. It will cycle through Random
random order [for up to 256 tracks]), Random Folder (the tracks in the current folder will play in a random order) and
Single Play () (the current track will play until its end and then stop.
• To change the Time Mode in the display, press the Time button. It will cycle through Elapsed (how much time has
elapsed of the current track) and Remaining (how much time remains of the current track).
• To remove a USB device, gently remove it from the USB Port when it is not playing. (Removing a USB device while it
is playing can damage it.)
Playing Audio from a Bluetooth Device
To play Bluetooth Tracks:
If the unit is off, press the Power button to power it on.
1.
Select Bluetooth (BT) as the media type (described in
2.
Navigate to your Bluetooth device's setup screen, find PMD-526C and connect.
3.
Note: If your Bluetooth device prompts for a pairing code, enter 0000.
In Bluetooth Mode, you can perform any of the following operations:
• To start, resume, or pause playback, press the Play/Pause button.
• To pause playback, press the Stop button.
• To see a list of Bluetooth devices, press the Device Sel. button. The screen will show "BT Device List". Use the
|<</<< and >>/>>| buttons to navigate through the list of Bluetooth devices. When you find one you want to pair to,
select it by pressing the Jog Dial.
• To disconnect from a paired Bluetooth device, press and hold the Pairing button for 1.5 seconds. If you have set a
custom Bluetooth pairing password, it is required to input this password before pairing. If a custom password was not
set, (factory default: 0000) it is not required to input the password.
• To remove the list of paired devices and disconnect from any currently paired device, press and hold the Clear
button to remove all paired devices from the unit's memory (and also unpair from a currently paired device). After the
devices have been cleared from the unit's memory, to connect again to the same device, go to your Bluetooth device
and select "Unpair" or "Forget the Device," depending on the type of device that you have. You can then select PMD-
526C from your list of Bluetooth devices and connect.
10
Selecting the Media Playback
Selecting the Media Playback
Mode).
(the same track will
(the list of all
(the list of all tracks will play in a
Mode).