Publicité
Les langues disponibles
Les langues disponibles
Tools and Parts
TOOLS NEEDED:
⁵⁄₁₆" Socket wrench or nut
driver
PART SUPPLIED:
Swivel Casters with
Brakes (2)
Swivel Casters (2)
Check that you have everything necessary for correct installation.
Proper installation is your responsibility
Unpack the Casters
1. Unpack the casters and hardware from the small box.
2. Verify contents. See "Tools and Parts."
Caster Installation
WARNING
Excessive Weight Hazard
Use two or more people to move and install
refrigerator.
Failure to do so can result in back or other injury.
IMPORTANT:
Always lay the refrigerator on its left side, with the hinges
facing the top, during the caster installation. If you lay the
refrigerator on its back, you can damage the refrigerator.
Never place refrigerator on its top. It may damage the
compressor.
Allow the refrigerator to sit upright for 4 hours before plugging
into an electrical outlet.
Install either the casters or the leveling legs. Do not install
both.
1. Unplug refrigerator or disconnect power.
2. Remove food and any adjustable shelves from refrigerator.
3. Lay a piece of cardboard or other protective material on the
floor. This will protect the refrigerator from scratches.
4. Using two or more people, place the refrigerator on its side
on top of the cardboard or protective material. Make sure the
door hinge is facing upward.
IMPORTANT: It is important that the door hinge face upward
during the entire caster installation.
2
ASSEMBLY INSTRUCTIONS
Cardboard or other protective
material
#10 – 24 x ³⁄₈" Hex-head
screws (16)
5. Using #10 – 24 x ³⁄₈" hex-head screws, attach both locking
casters toward the front of the refrigerator.
6. Insert the hex-head screws from the bottom and screw
through the caster into the bottom of the refrigerator.
7. Using #10 – 24 x ³⁄₈" hex-head screws, attach both swivel
casters to the refrigerator back.
8. Insert the hex-head screws from the bottom and screw
through the caster into the bottom of the product.
A
B
A
A. Locking casters
B. Refrigerator front
C. Swivel casters
Complete the Assembly
1. Lock the front casters.
NOTE: Locking the casters will help prevent the refrigerator
from moving while being lifted.
2. Using two or more people, stand the refrigerator upright.
3. Unlock the casters and move the refrigerator into its desired
location.
4. After the refrigerator is in position, re-lock the casters.
5. Allow the refrigerator to sit upright for 4 hours.
6. Plug in refrigerator or reconnect power.
C
Publicité
