DeLonghi DFP250 Mode D'emploi page 8

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

To use the citrus press
1 Fit the drive shaft and bowl onto the power unit.
2 Fit the sieve into the bowl - ensuring the sieve handle is
locked into position directly over the bowl handle.
3 Place the cone over the drive shaft turning until it drops all
the way down.
4 Cut the fruit in half. Then switch on and press the fruit onto
the cone.
- The citrus press will not operate if the sieve is not
locked correctly.
Care & cleaning
- Always switch off and unplug before cleaning.
- Handle the blades and cutting discs with care - they are
extremely sharp.
- Some foods may discolor the plastic. This is perfectly nor-
mal and won't harm the plastic or affect the flavor of your
food. Rub with a cloth dipped in vegetable oil to remove
the discoloration.
- Any other servicing should be performed by an authorized
service representative.
Power unit
- Wipe with a damp cloth, then dry. Ensure that the interlock
area is clear of food debris.
- Store excess cord in the storage area at the back of the
machine (I).
Blender
1 Empty the carafe before unscrewing it from the blade unit.
2 Wash the carafe by hand.
3 Remove and wash the sealing ring.
4 Don't touch the sharp blades - brush them clean using hot
soapy water, then rinse thoroughly under the tap. Don't
immerse the blade unit in water.
5 Leave to dry upside down.
Twin beater geared whisk
- Detach the beaters from the drive head by gently pulling
them free. Wash in warm soapy water.
- Wipe the drive head with a damp cloth, then dry. Do not
immerse the drive head in water.
Bowl/lid and attachments
- Wash by hand, then dry.
- Alternatively they can be washed on the top rack of your
dishwasher. A short low temperature program is recom-
mended.
8
Service & customer care
- If the cord is damaged it must, for safety reasons, be
replaced by De' Longhi or an authorized De' Longhi service
center.
If you need help with:
- using your appliance or
- servicing or repairs
- Contact the customer service hotline listed on the warranty
page.
Designed and engineered by De' Longhi in the UK.
Made in China.

Publicité

Table des Matières
loading

Table des Matières