Switching The Product On And Off; Charging The Battery - Hama Soundcup-S Mode D'emploi

the product as a whole. Do this in compliance with the legal requirements.
• Keep the packaging material out of the reach of children due to the risk of
suffocation.
• Dispose of packaging material immediately according to locally applicable
regulations.
• Do not modify the product in any way. Doing so voids the warranty.
4. Getting Started and Operation

4.1 Switching the product on and off

• Press and hold the function button
or off. An acoustic signal will sound and the status LED (4) will start flashing or go off.
Note – Automatic shutdown
Note that the speaker will automatically switch off after 10 minutes without
action (no audio playback/no Bluetooth

4.2 Charging the battery

Warning – Rechargeable battery
• Only use suitable charging devices with USB connections for charging.
• As a rule, do not use charging devices or USB connections that are defective and
do not try to repair them yourself.
• Avoid storing, charging or using batteries in extreme temperatures.
• When stored for a long period of time, batteries should be charged regularly (at
least every three months).
• Charge the speaker fully before using it for the first time.
• Connect the included Micro-USB charging cable to the speaker's Micro-USB port (3).
• Connect the unused connector on the Micro-USB charging cable to a suitable USB
charger. Please refer to the operating instructions for the USB charger used.
Note – Charging
• It takes approx. 4 – 5 hours to completely charge the product.
• The speaker's battery can be charged whether the speaker is on or off.
• If the battery capacity is less than 10%, the speaker will emit two acoustic
signals. You will only receive this information if the speaker is on.
• The actual battery life varies depending on use of the device, the settings and the
ambient conditions (rechargeable batteries have a limited service life).
(1) for about 4 seconds to switch the speaker on
function).
®
3