• Place a CD on the center spindle with the cover side faced up
and close the CD door.
• On the LCD display (see 36.1) the indication „- -„ will be shown
for a few seconds. Afterwards, the total number of tracks will be
displayed.
• Press PLAY/PAUSE (see 36.9) to start the playback. The track
number is indicated (e.g. „01").
• Adjust the volume by rotating the VOL/ON control (see 36.17) to
a suitable listening level.
• To interrupt the playback temporarily (pause), press PLAY/PAUSE
(see 36.9). Pressing PLAY/PAUSE again resumes the playback.
• Press STOP (see 36.12) to stop the playback of the CD.
Selection of a specific track
During the playback you can skip with
36.11) to the next or previous track.
• Select the track in the playback, stop or pause mode with
36.10) or
(see 36.9).
• Pressing briefly on
Pressing this button repeatedly, you can skip several tracks until
the desired track number is shown on the display.
• Pressing briefly on
of the current track.
• To skip back multiple tracks, press
42
(see 36.11) and start the playback with PLAY/PAUSE
(see 36.10) you can skip to the next track.
(see 36.11) you will return to the beginning
(see 36.10) or
(see 36.11) repeatedly.
(see
(see