Parts Description - ION Sound Stone Guide D'utilisation Rapide

Features

Parts Description

1
6
1. Power: Hold this button to power Sound Stone on and off.
Note: Sound Stone will power off after 10 minutes if there is no Bluetooth connection.
Sound Stone will automatically power off after 30 minutes if no audio is playing.
2. Bluetooth Connect: Press this button briefly to begin Bluetooth connecting.
3. Link: Press this button to link two Sound Stone units together.
4. Micro-USB Charging Port: Insert the included charging adapter here to charge the
Sound Stone battery.
Note: When the battery is at a low state of charge, the speaker will help notify you every
4 minutes by: saying "Low battery, please charge" (when the vocal notifications are
enabled), or playing two short tones (when the vocal notifications are disabled).
Note: If you experience the music cutting out at loud volumes, this is an indication that
the battery is low. To avoid experiencing audio cutting out while the product's battery is
at a low state of charge: decrease the volume, and/or charge the battery.
5. Reset: If Sound Stone is working abnormally, shut down the unit by placing a paperclip
into this hole and gently push until the unit turns off. Try this only after you have first
attempted to restart Sound Stone using the Power button.
6. Charging LED: This LED is solid red when the battery is charging and turns off when the
battery is fully charged/no adapter is connected.
7. Bluetooth LED: This LED slowly blinks blue when the speaker is powered on, blinks fast
while Bluetooth searching, and is solid when Bluetooth connected.
8. Link LED: This LED blinks fast when searching for another Sound Stone and is solid
when linked to another Sound Stone.
4
2
7
3
8
4 5