Maintenance And Troubleshooting - Sammic GLASS-PRO GP-35 Manuel De L'utilisateur

NombreProducto |

Maintenance and troubleshooting

3.4.3 Washing
⚠ Wa r n ing
Risk of food poisoning from washing at low tempera-
ture
During heating, one of the cycle icons is lit and it is also possi-
ble to start the wash cycle, even if the setpoint temperatures re-
quired for correct sanitisation of the items have not been
reached.
– Sammic advises against carrying out washing cycles if the icon
is not lit.
1) Press the START button
machine.
– To move to the next phase of the wash cycle, press START
cessively.
– If the Thermal lock function is active, the machine does NOT respond
to the button being pressed.
– If the door is opened, the machine pauses the cycle and the
icon comes on.
– [Models with drain pump] The icon
phase after the rinsing process.
⚠ Ca ut io n
Risk of irritation from splashes
If you open the door in the middle of the cycle, the machine can
spray high temperature soapy water and, if it comes into con-
tact, irritate the skin and mucous membranes.
– Do not open the door in the middle of the cycle.
2) During the wash phase, the icon
3) During the rinse phase, the icon
4) When the wash cycle ends, the two icons
simultaneously.
⚠ Ca ut io n
Risk of irritation from high temperature water vapour
After the end of the wash cycle, when you open the door the
dishwasher, a large amount of steam comes out at high temper-
ature and may irritate the skin or eyes. The items may be at high
temperature and cause minor skin irritation/burns.
– When opening the machine door, avoid bringing your face close.
– If steam gets on your face, wash your face with cool water.
– Wait a reasonable amount of time before removing items from
the dishwasher.
5) Open the door and remove the basket from the dishwasher
18
to start the wash cycle in the
suc-
flashes during the drainage
flashes.
flashes.
and flash
6) If you want to wash more baskets, repeat the process from step
3.4.1-1).
⭆
If the PROG or START button
hours, the machine switches off automatically.
4 Maintenance and troubleshooting
Fig. 3: Machine filters
2 Overflow
3 Collector filter
4 Suction filter
4.1 Safety information
• Risk of scalding with the water in the tank: the water in the tank
is at a temperature of approx. 60 °C.
⇒
Do not put your hands in the tank for a prolonged period of
time.
⇒
When emptying or cleaning the tank manually, wear water-
proof rubber gloves.
• Risk of burns with the heating element: the surface of the heat-
ing element is subject to residual heat after use.
⇒
Avoid placing your hands close to the heating element after
using the machine.
is not pressed within 2.5
2 2
2 3
2 4
2 5
2 6
5 Drain filter
6 Collector
User's manual — 2900450/0