Cleaning The Accessories; Technical Data - HAEGER Super Set HB-80C-024A Mode D'emploi

Cleaning
Warning!
To prevent the risk of electric shock, injury or damage:
– Disconnect the power supply plug from the mains socket before cleaning.
– Never immerse the motor unit in water.
Caution! Never use scouring, corrosive or abrasive cleaning materials as these
could damage the appliance.
Cleaning the base unit
1. Clean the motor unit with a damp cloth. A little detergent may also be
used.
2. Wipe over with clean water.
3. Do not use the motor unit again until it is completely dry.

Cleaning the accessories

1. Put the parts in cold or lukewarm water to soften dough residues.
Note You can also add a little detergent to the water.
2. Remove softened dough residues with a washing-up brush.
3. Rinse off with clean water.
4. Allow parts to dry completely before using them again.

Technical Data

Model No. ............... HB-80C.024A
Voltage: .................. 220-240V~ 50/60Hz 800W
Classification: ......... Class II
Conformity CE
This product has been tested and produced according to all relevant current
CE guidelines, such as:
- electromagnetic compatibility Directive 2014/30/EU,
- Low voltage Directive (LVD) Directive 2014/35/EU,
- RoHS with its amendments Directive
and has been constructed in accordance with the latest safety regulations.
The CE mark attests this product with all relevant directives
Instructions for use
,
EU 2015/863
.
English
7