HAEGER Super Set HB-80C-024A Mode D'emploi page 7

Using the chopper
CAUTION: Do not use chopper bowl and blender for ice.
The chopper is intended for chopping ingredients such as nuts, meat, onions,
hard cheese, boiled eggs, garlic, herbs, dry bread etc.
The blades are very sharp! So be very careful when handling the blade unit. Be
especially careful when you remove the blade unit from the chopper bowl,
when you empty the chopper bowl and during cleaning.
Note: before starting using the chopper bowl, attach the non-slip rubber ring
from below such that a tight fit is ensured all around.
1. Place the blade insert onto the driver pin of the bowl.
2. Place the ingredients in the bowl and then fit the cover.
3. Attach the motor unit to the cover. The motor unit must engage
noticeably.
4. Plug in the appliance and then press the Start button (B), use the speed
control button (A) to adjust the speed, or press the TURBO button (C).
5. After chopping remove the mains plug, take out the motor unit then the
cover.
6. Remove the blades holding it by its plastic part and then remove the
ingredients.
7. Clean the device immediately if possible.
Instructions for use
English
5