Mobiclinic Ulises Mode D'emploi page 35

PT DE IT
The guide for charging steps::
1. Turn off the scooter with the key switch. Open the charger connector lead, placed on the back of the
scooter. Connect the charger. (FIG.27 )
Turn off the scooter with the
key switch.
Warning: Match the charger socket and charger plug properly.
2.
Insert one end of the AC power wire into the scoket of household power then
insert the other plug the socket of the charger. ( FIG.28 ) Verify the connection
before you turn on the main power switch. Red light indicates power on, orange
light indicates on charging and green light means fully charged.
3.
Turn off the power switch first when the battery is fully charged. Then take out the
DC charging connector before you take out the AC input power socket.
34
FR EN ES
Fig. 27
Open the charger connector lead, placed on the back of
the scooter. Connect the charger.
Ulises
Fig. 28