Minimum Dimensions - Jenn-Air JMC6224HL Instructions D'installation

Cabinet Dimensions - Standard Installation
For proper installation, the following minimum clearances must exist above and below the cutout opening.
Installed in Cabinet
Front View
A
B
C*
g
A. 23 / " (60 cm) minimum width of cabinet
5
8
B. 22" (55.8 cm) width of cutout
C. 17 3 / " (45 cm) recommended height of cutout*
4
D. 1/2" (1.2 cm) minimum top of cutout to bottom of upper cabinet
door
E. 1/2" (1.2 cm) minimum bottom of cutout to top of lower cabinet
door or 5/16" (8 mm) without bottom trim installed
F. 21 / " (53.5 cm) minimum depth of cutout
1
16
g. Recommended junction box location
H. 36 / " (92.8 cm) minimum bottom of cutout to floor (Canada only)
9
16
NOTE: True dimensions are in mm or cm and converted to
inches.

Minimum Dimensions

Rear View
D
E
F
g
H
Installed under Counter
(Without cooktop installed above)
NOTE: Under counter oven installation can only be done in the
US. Canada cannot install this oven under the counter.
f
C*
A. 23 / " minimum (60 cm) width of cabinet
5
8
B. 22" (55.8 cm) width of cutout
C. 17 / " (45 cm) recommended height of cutout*
3
4
D. 1/2" (1.2 cm) top of cutout to underside of countertop
E. 1/2" (1.2 cm) bottom of cutout to floor
or 5/16" (8 mm) without bottom trim installed
f. Recommended junction box location
*Will fit cutout height from 17
NOTE: True dimensions are in mm or cm and converted to
inches.
D
A
f
B
E
/ " (44.6 cm) to 17 / " (45.6 cm).
9 15
16 16
3