Technical Data; Trouble Shootings - Trebs Comfortice 99339 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

TECHNICAL DATA

model
climate type
ice making capacity
ice storage
water tank capacity
rated voltage / Frequency
rated current
input power
shock protection grade
refrigerant
insulation layer
measurement
net weight
(The above data is only for reference, subject to the rating label)

TROUBLE SHOOTINGS

problems
The compressor makes a
buzzing noise
Ice full indicator light on
but with less ice in the
basket
Lack of water indicator
is on but water tank has
a lot of water
No matter whether
there is no any water or
just little water in the
tank, but the pilot lamp
of being lack of water is
still off!
260X345X332(mm)
reasons
too low voltage
Room temperature is too
low
Ice blocking trouble
the sensor was broken
the sensor is broken
water conductivity less
water conductivity less
the sensor is broken
99339
T
12Kg/24h
700g
2.15L
220-240V~50Hz
0,68A
140W
I
R600a/23g
EPS
10Kg
Turn off the ice maker.
Make sure the voltage is on normal and
Take out the ice basket and put it back
until the light is off, and restart the
Please clean up Ice basket, and restart
the machine if the alarm is still reported
full of ice, please ask for a technician to
please ask for a technician to repair.
please ask for a technician to repair.
To add appropriate amounts of salt
please empty the water inside and
clean(Especially cleaning the bolt<s> of
detecting the water level) and then
restart the ice-making appliance
please ask for a technician to repair.
solutions
restart.
machine.
repair.
15

Publicité

Table des Matières
loading

Table des Matières