Alesis Elevate 5 MKII Guide D'utilisation page 3

User Guide (English)
Introduction
1. Make sure all items listed in
2. Read the safety instruction booklet before using the product.
3. Place the product in an appropriate location for operation.
4. Ensure high quality, shielded audio cables are used away from sources of electromagnetic
interference.
Box Contents
Elevate 5 MKII Speakers (Stereo Pair)
RCA-to-1/8" (3.5 mm) Audio Cable
1/4" (6.35 mm) Interconnection Cable
Power Cable
User Guide
Safety & Warranty Manual
Support
For the latest information about this product (system requirements, compatibility information, etc.)
and product registration, visit alesis.com.
For additional product support, visit alesis.com/support.
Setup
Items not listed in Introduction
Before turning on the right speaker of Elevate 5's power, do the following:
1. Ensure the volume control on Elevate 5's right speaker is turned down.
2. Connect Elevate 5's left and right speakers with the included 1/4" (6.35 mm) interconnection
cable.
3. Connect any audio sources (such as an audio interface, mixer, etc.) to the inputs on Elevate 5's
right speaker. Power on the audio sources.
4. Connect the included power cable to the power connector on Elevate 5's right speaker, and then
plug the other end of the power cable into an outlet.
5. Flip the power switch on Elevate 5's right speaker to the "on" position.
6. Adjust the volume control on the front panel of Elevate 5's right speaker.
Mixer
Introduction Box Contents
Box Contents are sold separately.
Power
are included.
3