Unpacking And Assembly - Oregon BL300 Manuel D'instructions

Unpacking and Assembly

Unpacking
What's in the box?
The blower requires some assembly before use
These items ship with the blower:
• Blower
• Nozzle
• Harness
• Charger and power cord (if so equipped)
• Battery (if so equipped)
After removing the blower from the box, inspect
it carefully to ensure no damage has occurred
during shipping and that no parts are missing
If any parts are damaged or missing, do not
use the blower Contact Oregon® Cordless Tool
System at 888 313 8665 to obtain replacement
parts
14
Unpacking and Assembly
Assembly
WARNING: Only operate the blower with
the nozzle properly assembled.
WARNING: A battery operated tool
with the battery pack inserted can
start accidentally. Remove the battery
pack before assembling or performing
maintenance.
Before using the blower, connect the nozzle to
the blower tube
• Orient the nozzle so that the two lugs (1) on
the blower tube align to the two slots (2) on
the nozzle (Fig 3)
FIG. 3
• Press the nozzle onto the blower tube (1), then
rotate one quarter turn (2) to lock into place
(Fig 4)
FIG. 4
(1) (2)
(2) (1)
Blower Model BL300