Unpacking And Assembly; What's In The Box - Oregon BL300 Manuel D'instructions Original

UNPACKING AND ASSEMBLY

UNPACKING AND ASSEMBLY
UNPACKING

WHAT'S IN THE BOX?

The blower requires some assembly
before use . These items ship with the
blower:
• Blower
• Nozzle
• Harness
• Charger and power cord (if so equipped)
• Battery (if so equipped)
After removing the blower from the box,
inspect it carefully to ensure no damage
has occurred during shipping and that
no parts are missing . If any parts are
damaged or missing, do not use the
blower . Contact OREGON® to obtain
replacement parts . For country-specific
telephone numbers, see "Customer
Service by Country" .
16
OREGON® Cordless Tool System
BLOWER MODEL BL300
ASSEMBLY
WARNING: ONLY OPERATE
THE BLOWER WITH THE NOZZLE
PROPERLY ASSEMBLED.
WARNING: A BATTERY OPERATED
TOOL WITH THE BATTERY PACK
INSERTED CAN START ACCIDENTALLY.
REMOVE THE BATTERY PACK BEFORE
ASSEMBLING OR PERFORMING
MAINTENANCE.
Before using the blower, connect the
nozzle to the blower tube .
• Orient the nozzle so that the two lugs (1)
on the blower tube align to the two
slots (2) on the nozzle (Fig . 3) .
FIG. 3
(1)
• Press the nozzle onto the blower tube (1),
then rotate one quarter turn (2) to lock
into place (Fig . 4) .
FIG. 4
(2)
(2) (1)
AA 1214 - F/N 571703