Maintenance And Cleaning; Inspection; Cleaning; Battery Pack - Oregon BL300 Manuel D'instructions

Maintenance and Cleaning

Blower
WARNING: A battery operated tool
with the battery pack inserted can start
accidentally. Remove the battery pack
before inspecting, cleaning or performing
maintenance.
CAUTION: Inspect the blower regularly.
Regular inspection is the first step to
proper maintenance. Follow the guidelines
below to maximize safety and satisfaction.
Have any damaged or excessively worn
parts replaced immediately.
CAUTION: When cleaning the blower,
do not immerse in water or other liquids.
Do not use a pressure washer to clean the
blower.

Inspection

Before each use, and if the blower has been
dropped, inspect these parts:
• Handle: The handle should not have cracks or
other damage It should be clean, dry and free
of oil, moisture or anything else that prevents
a firm grip
• Electronics Cooling Vent: The electronics
cooling vent should be clear and free of debris
• Battery Pack: The battery pack should be
clean, dry and show no signs of puncture,
impact or other damage The contacts should
be clean, dry and free of debris
• Battery Port: The battery port and contacts
should be clean, dry and free of debris
• Variable Trigger: The variable trigger should
operate smoothly and should cause increased
blower speed with increased pressure
• Trigger Lock-out: The variable trigger
should prevent the motor starting if it is not
depressed
• Intake Screen: The intake screen should be
free of cracks or other damage and should
adequately cover the air intake so as to
prevent debris from entering the intake
• Blower Tube: The blower tube should be
free of cracks or other damage and should fit
snugly to the nozzle
Blower Model BL300
Maintenance and Cleaning
• Nozzle: The nozzle should be free of cracks
or other damage and should fit snugly to the
blower tube
• Harness: Fabric should not be cut or frayed,
and adjustment buckle and clips should be
free from cracks
• Screws: Screws should be tight and hold each
component in place

Cleaning

CAUTION: When cleaning the blower,
do not immerse in water or other liquids.
Do not use a pressure washer to clean the
blower.
• Remove the battery
• Remove any debris from the intake screen to
ensure unrestricted airflow
• Clear debris from the nozzle
• Clear any debris from the battery port and
wipe the contacts
• Wipe dust and clippings from the blower

Battery Pack

IMPORTANT: There are no user serviceable
parts inside the battery pack. Do not
disassemble.
Lithium ion batteries have a finite operating life
If the amount of use time per charge decreases
noticeably under normal, non-turbo mode use,
the battery pack is at the end of its useful life
and should be replaced
• Make sure the battery pack, including the
contacts, is clean, dry and has no signs of
puncture, impact or other damage Broken
batteries can cause fires or emit hazardous
chemicals
• Clean dirty contacts with a soft, dry cloth Dirt
or oil can cause a poor electrical connection
resulting in loss of power
• Store battery with a full charge, on a charger
when possible

Charger

IMPORTANT: There are no user serviceable
parts inside the charger. Do not
disassemble.
• Unplug the charger from the electrical outlet
• Clean dirty contacts with a soft, dry cloth
21