Hitachi DH 24DV Mode D'emploi page 11

Outer diameter
11.0 mm
12.3 mm
12.7 mm
14.3 mm
14.5 mm
17.5 mm
21.5 mm
13 mm Hammer Drill chuck and Chuck wrench
Impact Drill Application
(
Straight Shank Bit
3. Anchor setting
Anchor setting adapter (for rotary hammer)
Anchor size
W1/4"
W5/16"
W3/8"
Anchor setting adapter (for manual hammer)
Anchor size
W1/4"
W5/16"
W3/8"
W1/2"
W5/8"
4. Drilling holes and driving screws (rotation only)
Drill chuck, chuck adapter (G) and chuck wrench
Drill chuck (13VLR)
Special
screw
Chuck wrench
Taper mode
Morse taper (No. 1)
Morse taper (No. 2)
A-taper
B-taper
13 mm Hammer
)
Drill Chuck
(SDS plus shank)
Chuck wrench
Anchor setting adapter
(for rotary hammer)
(SDS plus shank)
Anchor setting adapter
(for manual hammer)
Chuck adapter (G)
(SDS plus shank)
Applicable drill bit
Drill bit (taper shank)
Drill bit (taper shank)
Taper shank adapter formed A-taper or B-taper
is provided as an optional accessory, but drill bit
for it is not provided.
English
11.0 – 17.5 mm
21.5 mm
10