Read.This.First!
Make.a.backup.of.important.
recorded.data
JVC will not be responsible for any lost
data. It is recommended to copy your
important recorded data to a DVD or other
recording media for storage. (Z pg. 14)
Make.a.trial.recording
Before the actual recording of important
data, make a trial recording and play back
the recorded data to check that the video
and sound have been recorded correctly.
We recommend you to use the same
recording media when performing both the
trial recording and the actual recording.
Reset.the.camcorder.if.it.does.
not.operate.correctly.
Precautions.on.handling.
batteries
•
Be sure to use the JVC BN-VF808U/
VF815U/VF823U battery packs.
•
If the camcorder is subjected to
electrostatic discharge, turn the power off
before using it again.
If.a.malfunction.occurs,.
stop.using.the.camcorder.
immediately.and.contact.
www.jvc.com.or.by.phone.at.
1-800-252-5722.
Recorded data may be erased while the
camcorder is being repaired or inspected.
Back up all data before requesting repairs
or inspections.
How.to.Select.an.Item.Using.the.
Touch.Sensor
An example screen in English is used for the
guidance below.
E.g. Selecting an item from the menu list
R
(Z pg. 17)
Q Touch the MENU button.
R Slide your finger up and down on the
S Touch the OK button.
CAUTION
Touch the sensors with your finger. The
sensors do not function if you touch them with
your fingernail or with gloves on.
On-screen.function.guide
The on-screen function guide is displayed at
the bottom of the screen during menu display,
etc.
(on the menu screen)
MENU
SHUTTER MODE
IMAGE QUALITY
GAIN UP
BASIC SETTINGS
S
sensor.
EDITED COPY
CHANGE EVENT REG.
EDIT PLAYLIST
BASIC SETTINGS
CHANGE REGISTERED EVENT
Q