Further.information - JVC GZ-MS90U Manuel D'utilisation

FURTHER INFORMATION
Troubleshooting
The camcorder is a microcomputer-controlled
device. External noise and interference (from
a TV, a radio, etc.) might prevent it from
functioning properly.
The.following.phenomena.are.not.
malfunctions.
•
The camcorder heats up when it is used
for a long time.
•
The battery heats up during charging.
•
When playing back a video file, the
image stops momentarily or the sound is
interrupted at junctions between scenes.
Trouble
No.power.is.supplied.
The.power.does.not.
turn.on,.or.the.battery.
operation.time.is.
extremely.short.even.
after.the.battery.is.fully.
charged.
The.power/charge.
lamp.on.the.camcorder.
does.not.light.during.
charging.
Recording.cannot.be.
performed.
During.recording,.the.
date/time.does.not.
appear.
Digital.zoom.does.not.
work.
The.focus.is.not.
adjusted.automatically.
The.continuous.
shooting.speed.is.slow.
Playback.cannot.be.
performed.
If.you.cannot.upload.the.
file.to.YouTube™
•
•
•
L
•
Connect the AC adapter securely.
•
Detach the battery pack once again and reattach it firmly.
•
Replace the dead battery with a fully charged one.
•
Make sure to use the camcorder under appropriate
operating temperatures.
•
The battery is worn out and needs to be replaced. Please
purchase a new one.
•
Charging may stop in places subject to extremely high/low
temperatures to protect the battery. It is recommended
to charge it in places with a temperature of 10°C to 35°C
(50°F to 95°F).
•
When the battery is already fully charged, the lamp does
not light. Check the remaining battery power.
•
SD card is full. Delete unnecessary files or replace the SD
card.
•
Touch the DISP button once.
•
Change the settings in [ZOOM].
•
Digital zoom is not available in the still image recording
mode.
•
Set [FOCUS] to [AUTO].
•
Clean the lens and check the focus again.
•
The continuous shooting speed will drop after repeated
continuous shots, depending on the SD card or under
certain recording conditions.
•
To watch images on a TV, set the TV's input mode or
channel that is appropriate for video playback.
•
Refer to "Latest Information", "Updater", "Troubleshooting",
etc. in the help of PowerCinema NE for Everio.
To solve the problem, first follow the
instructions below.
If the problem is not solved, reset the
camcorder. (Z below)
If the problem persists, please consult your
nearest JVC dealer.
.To.reset.the.camcorder
1) Close the LCD monitor to turn off the
camcorder and remove the power
supply (battery pack or AC adapter)
from the camcorder, then reattach it.
2) Select [FACTORY PRESET] from the
MENU.
Action Z pg.
6
6
–
20
–
–
9
–
–
–
–
–
19
–
11
–
1