Controlling The Cabinet Lighting - Thermador T24UW820RS Guide D'utilisation Et D'entretien

To set a new temperature press the Selection Buttons
COOLER (-) or WARMER (+).
The temperatures will increase or decrease together by
one degree every time the Selection Button is pressed.
The temperature can be displayed in degrees Celsius
(°C) or degrees Fahrenheit (°F). The factory setting is
degrees Fahrenheit (°F).
Temperature Ranges
Wine Reserve upper: 40º to 52º
Wine Reserve lower: 52º to 64º
*Suggested upper temp.:46º
*Suggested lower temp.: 58º
The correct serving temperature is crucial for the taste
and therefore your enjoyment of the wine.
We recommend serving wine at the following drinking
temperature.
Type of Wine
Bordeaux, Shiraz,
Rich, intense,
Rhone wines
spicy warm
Cabernet Sauvignon,
Reds
Burgundy
Rioja, Pinot Noir
Medium to
Lighter bodied Chianti, Zinfadel
Reds
Madeira, Chinon
Juicy, fruity
Young Spanish,
Reds Portuguese wines
Full-
bodied/oaked White Burgundy
Whites
Chardonnay, Australian
Medium to
Semillon
lighter bodied
Chablis, Sauvignon
Whites
Blanc
Sauternes,
Sweet and
Muscat/Moscato
Sparkling
wines
Champagne, Cava, Asti

Controlling the cabinet lighting

The interior cabinet light settings can be controlled
using the LIGHT button on the CONTROL PANEL.
The luminosity level will increase by one unit
(displayed as one LED light over the LIGHT button)
every time the button is pressed. When the level is
already in "High" (3 LED lite), the next press will reset
the level to "None" and no LED light will be displayed.
When the door is opened, the interior light will
automatically illuminate to its maximum intensity (High
level) independently of the setting on the control.
When the door is closed, the interior light will adjust
back to the setting indicated above the LIGHT button
as per following table:
Categories Temp.
64°F
63°F
62°F
59°F
57°F
54°F
52°F
50°F
48°F
47°F
43°F
LIGHT setting
If the LIGHT preset is "None", the interior lights will turn
on only when the door be opened and will dim off again
when the door be closed.
These light level settings can be used to conveniently
display the contents of the Wine Reserve even when
the door is closed.
The factory default for closed-door light level setting is
"Medium".
• Press the LIGHT button repeatedly to cycle between
the level settings.
• The interior lighting will temporarily adjust to the
selected setting for a few seconds. This provides a
visual sample of the selected level, before returning to
the open-door (maximum) lighting level.
Closed-Door
Cabinet Light Level
None
Low
Medium
High
(same level as when
door is opened)
8 | P a g e