Cleaning And Maintenance; Technical Specifications - Perel VTBAL501 Mode D'emploi

6.5 Calibration
1. Switch on the scales.
2. Press and hold the on-off button. At the same time, press the mode button and
wait for the display to show "CAL".
3. Press the mode button again; the required calibration weight will flash on the
display. Put the calibration weight in the centre of the platform.
4. Calibration is complete when the display shows "PASS".
5. The scales go back to the normal weighing mode.
7.

Cleaning and Maintenance


Occasionally wipe with a damp cloth to keep it looking new. Do not use harsh
chemicals, cleaning solvents or strong detergents.

Do not immerse the device in any liquid.
8.

Technical Specifications

power supply
material ................................................................................. ABS + stainless steel
capacity .......................................................................................... 100 kg/220 lb.
graduation ......................................................................................... 50 g/1.76 oz.
units .......................................................................................... g/kg/oz./lb./lb:oz.
dimensions ............................................................................... 210 x 160 x 39 mm
display ................................................................................................ 64 x 25 mm
weight ...................................................................................................... 1.85 kg
Use this device with original accessories only. Velleman nv cannot be held
responsible in the event of damage or injury resulting from (incorrect) use of
this device. For more info concerning this product and the latest version of this
manual, please visit our website www.perel.eu. The information in this manual
is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights
reserved. No part of this manual may be copied, reproduced, translated or reduced to
any electronic medium or otherwise without the prior written consent of the copyright
holder.
V. 01 – 02/10/2018
battery ............................................................... 2 x 1.5 V AAA batteries (incl.)
adapter .......................................................... 6 VAC or DC - 200 mA (not incl.)
VTBAL501
5 ©Velleman nv