Perel VTBAL501 Mode D'emploi page 4

4. Batteries
WARNING
Do not puncture batteries or throw them in fire as they may explode. Do not attempt to
recharge non-rechargeable batteries (alkaline). Dispose of batteries in accordance with
local regulations. Keep batteries away from children.

Open the battery compartment and insert the batteries according to the correct
polarity.

Replace the batteries as soon as the display turns dark.

Remove the batteries after use.
5. Description
Refer to the illustrations on page 2 of this manual.
1
2
3
6. Operation
6.1 General Operation
WARNING
The scales are overloaded as soon as the display shows "O-Ld". Remove the item from
the platform.
1. Place the scales on a levelled surface.
2. Press the on-off button to switch on the scales.
3. Place the item on the platform and wait until the reading on the display is stable.
4. Switch off the scales after use. Note that the scales will switch off automatically
5 minutes after the last operation.
6.2 Unit Conversion
1. Switch on the scales.
2. Press the mode button to select the weighing unit.
6.3 Tare Function
1. Switch on the scales.
2. Place the tare item on the platform.
3. Press the tare button once and wait for the display to show "0.00".
4. Add the net weight.
6.4 Hold Function
1. Switch on the scales and weigh the item.
2. Press the hold button to freeze the weight on the display.
V. 01 – 02/10/2018
weighing platform
on-off button
mode button
VTBAL501
4
5
4
hold button
tare button
©Velleman nv