LEGRAND 675 46 Notice D'installation page 34

4 - Quick configuration
Completing the Quick Configuration
After the Video Display has been configured and switched on the red "connection LED" flashes,
to indicate that the configuration must be finished.
Press any key, the Video Display display shows the language selection menu.
LANGUAGE SELECT.
LANGUAGE: -ENGLISH+
> CONFIRM
SUMMARY CONFIG.
ADDRESS N : 01
ADDRESS P : 02
MODE M : 06
> CONFIGURATION END
34
INTERCOMMUNICATING: intercommunicating call to the Handset with the same address
as the Video Display increased by a number equal to that indicated by the icon selected.
(e.g.: INTERCOMMUNICATING 4 intercommunicating call address to the Handset with N+4)
CAMERA: direct activation of the camera with the same address as the associated Entrance
Panel increased by a number equal to that indicated by the icon selected. (e.g. CAMERA
2 activates the camera with address P+2)
ACTIVATION: activation of the actuator with the same address as the associated Entrance
Panel increased by a number equal to that indicated by the icon selected.
(e.g. ACTIVATION 2 opening of the Entrance Panel door lock (configured with P+2) directly
without the call or activation of actuator 634 31 (configured with P+2 and MOD=5) or
activation of actuator 634 33 (configured with P+2)
STAIRCASE LIGHTS: activates the relay which switches the staircase lights ON/OFF
CYCLE CAMERAS: cyclically activates the cameras in the system starting from the associ-
ated Entrance Panel P (just one complete cycle is performed)
ANSWERING MACHINE: it can be used to record audio/video messages from the entrance
panel in case of absence; memos can also be recorded directly from the video handset
Select the language required
from those offered
Select CONFIRM
Press OK to confirm the
selection
The display shows a mask summarising the configura-
tion made
Press OK to confirm the
configuration
The display and the connection LED go out.
The Video Display is ready for normal working.