Alde 3010 213 Notice D'emploi Et Manuel D'installation page 15

10. 230v connection
This symbol lights up when 230V is connected to the
vehicle.
11. temperature
This symbol shows the temperature indoors in
intervals of 0,5°C.
12. Working with the lower menu row
The lower menu row can be used for such things as setting the clock, external start, night temperature, automatic
start of the heater. To use the lower menu row you must activate it by doing as follows:
1 Press the button with the arrow
until the symbol for the lower
menu row flashes.
flashes
blinkar
13. clock
To set the clock, first light up the lower row of functions (see item 12).
1 Press the button with the arrow
until the clock symbol flashes.
flashes blinkar
4 Then step forward with the
arrow key until the minutes are
displayed. Min flashes. Use +/On
and -/Off to set the minutes.
flashes
blinkar
This symbol shows the temperature outdoors
in intervals of 1°C. To use this function an
outdoor temperature sensor must be installed.
2 Light up the menu row by
pressing the +/On button.
The lower row with symbols
lights up.
blinkar
flashes
2 Press the +/On button.
Day flashes. Use +/On or -/Off
to set the weekday.
flashes
blinkar
5 Press Store and the time you
have set is stored.The example
shows Tuesday, 08.35.
3 To switch off the lower menu
row, press the -/Off button when
the symbol flashes. Activated
functions will be displayed even
if the lower menu row is switched
off.
flashes
blinkar
3 Step forward with the arrow key
until the time is displayed.
Hour flashes. Use +/On or -/Off
to set the full hour.
flashes
blinkar
If the power to the panel is
broken and the battery backup is
not connected, the clock must be
set again.
Weekday: 1-7
1=Monday
7= Sunday
Hours: 0-23
Minutes: 0-59
15