Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
4. Switch off the heater
1 Press the button with the arrow
until "On" (main breaker) in the
display flashes.
flashes
blinkar
5. Set the desired temperature
The temperature can be set from +5°C to 30°C in
intervals of 0,5°C.
1 Press the button with the arrow
until the symbol for selecting
temperature flashes.
The temperature shown is the
temperature which is set at
present (in this case 22.0°C).
flashes
blinkar
6. Warm water
If you need more warm water you can increase the
quantity temporarily for 30 minutes by increasing the
water temperature from 50°C to 65°C.
1 Press the button with the arrow
until the symbol for selecting
warm water flashes. The
"OFF" text is shown next to the
temperature on the display.
flashes
blinkar
If you want you can switch off more warm water before
30 minutes have elapsed.
1 Press the button with the arrow
until the warm water symbol
flashes. The "ON" text is shown
next to the temperature on the
display.
flashes
blinkar
2 Press the -/Off button. "Off" (main
breaker) in the display flashes.
flashes
blinkar
2 Increase the temperature by
pressing the +/On button. Lower
the temperature by pressing the
-/Off button. The diagram shows
that we have set the temperature
at 25.0°C.
flashes
blinkar
When 30 minutes have elapsed, the water temperature
returns to 50°C and the symbol goes out. When you have
selected more warm water, the circulation pump stops.
2 Switch the warm water on by
pressing the +/ON button.
The "ON" text is shown next to
the temperature on the display.
flashes
blinkar
2 Switch off the warm water by
pressing the -/Off button.
The "OFF" text is shown next to
the temperature on the display.
flashes
blinkar
3 The settings are ready. "Off"
(main breaker) is shown in the
display when the panel returns to
standby.
3 The settings are complete and
the boiler is working at the set
temperature.
3 The warm water symbol is
displayed when the panel returns
to standby.
3 The warm water symbol goes
out when the panel returns to
standby.
13
Publicité
Table des Matières
