•
at least 4 cm to the right-hand side
•
at least 10 cm to the ventilation slits on the left-hand side.
•
To not cover any openings! Otherwise ventilation of the
device will not be sufficient.
•
The distance to the back wall is guaranteed by means of
a spacer.
•
The back wall has to be fireproof (e.g. tiles).
Installation Instructions
for Bottom-Mounted Devices
•
Remove all objects from the cupboard and anything which is
fragile in the adjacent cupboards.
•
For the installation the cupboard must fulfil the following con-
ditions:
•
Thickness of the cupboard floor between 16 mm and
19 mm
•
Cupboard width at least 500 mm.
•
The installation depth below the cupboard to the wall has
to be at least 320 mm.
NOTE:
If you would like the microwave to close with the front edge
of the door, an installation depth of 350 mm is necessary.
•
The cupboard must not contain any cracks, splinters or
other damage. All connections must be stable.
•
The cupboard must be designed for a minimum load of
40 kg.
•
The wall mounting of the cupboard must be stable and an-
chored firmly in the wall with at least 2 screws.
CAUTION:
Do not install the device above a cooker!
•
When installing the device it must be ensured that there is a
power socket within reach.
•
The mains socket must be within easy reach, so that the plug
can be quickly removed in an emergency.
Important! Do not connect the device to the mains power
•
supply until after installation!
•
The device cannot be installed under cupboards under which
there is a lighting strip.
Installation Accessories
Item
1
2
3
The installation instructions are to be found on the accompanying
drilling template.
42
Designation
Number
Screws
4
Washers
4
Drilling template
1
WARNING:
•
Please adhere to the dimensions stated in the installation
instructions.
•
The installation accessories supplied should be used.
•
If screws are inserted too deeply (screws too long) this may
damage the device or represent a hazard to the user or
others.
Information on Grilling and
Combined Operation
•
As heat radiation is used during grilling and combined opera-
tion, please use only heat-resistant tableware.
•
When food is only being grilled, metal or aluminium tableware
may also be used -but not during combined or microwave
operation.
•
Only the grill is suitable for COMBI operation.
•
Do not place anything on top of the housing as this becomes
hot.
•
Always leave the ventilation slits uncovered.
•
Please use the grilling grid to move the food to be cooked
nearer to the heating element.
Suitable Microwave Tableware
•
The ideal material for use in a microwave is transparent and
allows the microwave radiation to heat the food evenly.
•
Round/oval dishes and plates are more suitable than rectan-
gular ones as the food in the corners may overcook.
CAUTION:
Danger of explosion from tightly sealed cookware.
•
Open sealed containers before cooking or heating.
•
Pierce plastic protective films several times with a fork.
•
Microwaves are not able to penetrate metal, so that no metal
vessels or plates should be used.
CAUTION:
Do not use any paper dishes made of recycled material as
these may contain small amounts of metal, which may result in
sparks or fires.
The list below is intended to help you select suitable microwave
tableware:
Material
Micro-
wave
Heat-resistant
yes
glass vessel
Non-heat-resistant
glass vessel
Heat-resistant ceramic
yes
vessel/plate
Plastic vessels suitable
yes
for microwave use
Kitchen roll
yes
Metal tray
Suitable for
grill
combination *
yes
yes
no
no
no
yes
yes
no
no
no
no
no
yes
no