ENGLISH
Residual heat indicator
The residual heat indicator lights up, as soon
as one cooking zone is hot.
Warning! Risk of burns from residual
heat! After you switch the appliance off,
Daily use
Adjusting the heat setting
Helpful hints and tips
When a cooking zone is switched on, it
may hum briefly. This is a characteristic of
all ceramic glass cooking zones and does not
impair either the function or the life of the ap-
pliance.
Energy saving
• If possible, always place lids on the pans.
• Place cookware on the cooking zone before
you switch it on.
Care and cleaning
Warning! Switch the appliance off and
let it cool down before you clean it.
Warning! For safety reasons, do not
clean the appliance with steam blasters
or high-pressure cleaners.
Warning! Sharp objects and abrasive
cleaning agents will damage the
appliance. Clean the appliance and remove
the residues with water and washing up liquid
after each use. Remove also the remnants of
the cleaning agents!
Turn clockwise to increase
Turn anti-clockwise to reduce
Turn to 0 switch off
the cooking zones need some time to cool
down. Look at the residual heat indicator.
Use residual heat for melting and keeping
food warm.
Function
• The bottom of the cookware should be as
thick and flat as possible.
• Switch cooking zones off before the end of
the cooking time, to take advantage of re-
sidual heat
• Bottom of pans and cooking zones should
be the same size.
Scratches or dark stains on the glass ce-
ramic that cannot be removed do not af-
fect the functioning of the appliance.
6
Knob
set-
ting
1 - 9
9 - 1
0