Safety Devices - MAXXMEE MC619P Mode D'emploi

Dust mite vacuum cleaner
you come into contact with the rays,
consult a doctor immediately.
■
Make sure that the safety switches of
the UV-C lamp are not blocked!
WARNING – Danger of Injury
■
Keep children and animals away from
plastic bags and fi lms. There is a
danger of suffocation.
■
Make sure that the connecting cable
is always kept out of the reach of
small children and animals. There is a
danger of strangulation.
■
Lay the connecting cable in such a
way that it does not present a trip
hazard.
■
Keep animals, hair, jewellery, wide
clothing, fi ngers and all other body
parts away from the suction opening
of the device. They could become
stuck to the device.
WARNING – Danger of Fire!
■
Do not cover the device during
operation in order to prevent it from
catching fi re. Do not insert anything
into the openings of the device and
make sure that these do not become
clogged.
NOTICE – Risk of Damage to
Material and Property
■
Only connect the device to a plug
socket that is properly installed and
matches the technical data of the
device. The plug socket must also be
readily accessible after connection so
that the connection to the mains can
quickly be isolated.
■
Only use suitable extension cables
whose technical data is the same as
that of the device.
■
Make sure that the connecting cable
is not squashed, bent or laid over
sharp edges and does not come into
contact with hot surfaces.
■
The device must be switched off
when inserting or removing the mains
plug.
■
Pull the mains plug out of the plug
socket if an error occurs during ope-
ration or before a thunderstorm.
■
Always pull the mains plug and never
the mains cable to disconnect the
device from the mains power. Never
pull or carry the device by the mains
cable.
■
Protect the device from heat, naked
fl ames, sub-zero temperatures, per-
sistent moisture, wet conditions and
impacts.
■
Do not try to lubricate the rollers with
lubricant or oil. This would cause dust
and dirt to increasingly adhere to the
rollers.
■
Use only original accessories from the
manufacturer in order to guarantee
that there is no interference that may
prevent the device from working and
to avoid possible damage.
■
Do not lay heavy objects on the de-
vice or the connecting cable.

SAFETY DEVICES

The device has two safety switches (8,
11). The UV-C lamp (12) only switches on
if both safety switches are pressed into
the motor unit (3) (automatic switch-off
function of the UV-C lamp deactivated).
This happens automatically when the
device is placed on a fl at surface. If the
safety switches lose contact with the
surface below, the automatic switch-off
function is activated and the UV-C lamp
stops being lit (automatic switch-off
function of the UV-C lamp activated).
EN
11