Toto TES201AA Manuel D'installation Et Guide D'utilisation page 12

PERIODIC MAINTENANCE - Inside the Tank
In order to use the product comfortably, clean the inside of the tank using
the following procedure.
[ 0.8 gallon (3L) Tank Type ]
1. Remove the cap nut and pull out the float
switch and the tank joint from the tank.
Note
Store the float switch and the tank joint in a
bucket, etc. to avoid dust adhering to it.
2. Remove the bracket.
If the tank is anchored on the floor or the
wall, turn the decorative screw by hand and
dismount the tank.
3. Wash the tank.
4. Put the tank back in the original position.
5. Put back the float switch and the tank joint.
Note
Mount the packing between the tank joint and
the tank without fail.
6. Mount the tank to the bracket for anchoring.
Float switch
Tank joint
Tank
Bracket
Decorative screw
Cap nut
Tank joint
Float switch
Tank
Decorative
screw
22
PERIODIC MAINTENANCE - Inside the Tank
[ 0.26 gallon (1L) Tank Type (special order)]
1. Remove the bracket from the underside of
the tank.
Cap nut
2. Remove the cap nut and pull out the float
switch and the tank joint.
3. Remove the cap of the supply port and the
ring.
4. Remove the cover and dismount the tank
from the bracket.
(Continued)
Bundling band
Remove it
Cap nut
Float switch
Tank joint
Supply port cap
Ring
Cover Tank Bracket
23