BATO SM-9602 Guide D'installation page 6

YOUR BATHDEPOT BATHTUB OR SHOWER IS GUARANTEED AGAINST ANY MANUFACTURING DEFECT FROM THE DATE
OF DELIVERY. THIS GUARANTEE COVERS THE FIBERGLASS STRUCTURE FOR A DURATION OF ONE (1) YEAR,
THE ACRYLIC FINISH FOR ONE (1) YEARS, THE BALNEAIR AND WHIRLPOOL JETS AS WELL AS THE PUMP AND THE AIR
BLOWER, AND THE PNEUMATIC AND ELECTRONIC CONTROLS FOR ONE (1) YEAR.
THIS GUARANTEE APPLIES TO THE ORIGINAL OWNER. IT COVERS PARTS FOR THE FIRST YEAR. THIS GUARANTEE
DOES NOT COVER TRAVEL EXPENSES NOR INSTALLATION FEES, NOR DOES IT COVER DEINSTALLATION FEES OR
TRANSPORTATION.
THE PRESENT GUARANTEE DOES NOT COVER DAMAGES CAUSED BY ACTS OF GOD, LIGHTNING, FIRE, BURNS, ABUSIVE
AND WRONGFUL USE, CARELESSNESS, BREAKAGE DUE TO IMPROPER HANDLING, DAMAGE RESULTING FROM THE USE
OF CHEMICALS OR ABRASIVE PRODUCTS OR IMPROPER WATER.
THIS GUARANTEE IS VALID ONLY IF THE INSTALLATION DIRECTIONS HAVE BEEN FOLLOWED AND THE INSTALLATION
HAS BEEN CARRIED OUT BY PROFESSIONALS WELL-ESTABLISHED WITHIN THE CONSTRUCTION INDUSTRY. YOU MUST
THEREFORE OBTAIN AND SAVE THE INSTALLATION INSTRUCTIONS AND ANY INSTALLATION PAPERS AND INFORMATION
TO THAT EFFECT.
THIS GUARANTEE IS LIMITED, AT THE MANUFACTURER'S CHOICE, TO THE REPAIRS OR REPLACEMENT OF THE PRODUCT,
OF ITS SYSTEMS AND/OR OF ANY OF ITS COMPONENTS. THERE SHALL BE NO POSSIBILITY OF CLAIMING ANY
INDEMNITY FOLLOWING THE LOSS OF AMENITIES OF LIFE, ANY LOSS OF REVENUE, NOR ANY LOSS DUE TO WATER.
IN THE CASE OF ANY MANUFACTURING DEFECT COVERED BY THIS GUARANTEE, BATHDEPOT SHALL HAVE HAD PRIOR
OPPORTUNITY TO CHECK THE PRODUCT AND TO FOLLOW UP ON THE PRESENT GUARANTEE, AS OTHERWISE NO
COST NOR RESPONSIBILITY SHALL BE ASSUMED BY THE COMPANY.
NO OTHER EXPLICIT OR IMPLIED PROMISE IS CONSIDERED AS BEING PART OF THE PRESENT GUARANTEE.
CLEAN YOUR PRODUCT REGULARLY WITH A MILD DETERGENT AND WATER. ALWAYS USE A NON-ABRASIVE
CLEANER AND NEVER USE STEEL WOOL, ACETONE, OR ANY POWERFUL DRY CLEANING PRODUCTS ON THE
SURFACES. FOR PAINT STAINS, USE TURPENTINE OR A PAINT THINNER. FOR JOINT COMPOUND STAINS, USE A
PLASTIC OR WOOD PALETTE COVERED WITH A DAMP CLOTH. DO NOT USE A METAL BLADE OR METAL BRUSH.
THE USE OF PRODUCTS FORMULATED ESPECIALLY TO CLEAN ACRYLIC FINISHES IS HIGHLY RECOMMENDED.
IF A RUBBER MAT IS USED, IT MUST BE REMOVED IMMEDIATELY AFTER EACH USE. THE IMPROPER USE OF THESE
INSTRUCTIONS WILL CAUSE DAMAGE AND ARE NOT COVERED BY THE WARRANTY.
WARRANTY
MAINTENANCE
1200 MICHÈLE-BOHEC, BLAINVILLE, QC J7C 5S4 CANADA
TEL.: 450,433,4449
5