Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
Delayed start programming
You can delay the start of a programme from 1 hour up to 24 hours.
1. Close the door, switch the dishwasher ON.
2. Press programme button to choose the desired programme.
3. Press the Delayed Start button, the time-remaining indicator changes to "1h".
4. Press the Delayed Start button as many times as necessary until the numerical
display shows the required delay.
5. To cancel the time delay setting, pressing the Delayed Start button until the time-
remaining indicator go out.
6. Press the Start/Pause button; the time-remaining indicator will blink and start to
count down. The programme will start when the delayed start indicator goes out
and the wash cycle will begin.
To cancel a delayed start programme in progress, follow the "Cancelling or modifying
a cycle while underway" instructions.
Reset drain function
You can use Reset drain function to stop the washing cycle under running by pressing
the Reset Button(both "C" and "D") for 3 seconds to "Reset ", and the appliance will
stop after a few minutes drain phase.
C
Reset
55
o
/65
o
70
o
55
o
50
o
45
o
40
o
cold
D
25
Publicité
Chapitres
Table des Matières
