geo-FENNEL FCT1 Data Mode D'emploi page 28

EN
If memory is full in DIRECT mode the newest reading will replace the oldest reading. The statistics will
be updated.
DELETE FUNCTIONS
The menu offers following delete functions:
Delete current data
Delete all data
Delete group data
USB CONNECTION TO PC
All measuring readings of all work modes can be downloaded to PC via USB port for data analysis. See
software guide for more details.
TROUBLE SHOOTING
The following list of error messages explains how to identify and eliminate faults:
Err1, Err2, Err3
>Err1
>Err2
>Err3
>Err4, 5, 6
>Err7
28
If the last measurement is considered to be wrong it can be deleted with
this function. At the same time the statistics will be updated.
With this function all data and statistics of the current working mode can
be deleted.
With this function all data and statistics as well as alarm values and one
and two point calibration will be deleted.
Connecting of probe fault; deviant signal
Eddy current probe
Magnetic induction probe
Both probes
Reserved
Thickness fault