Technical Data; Intended Use Of Instrument; Care And Cleaning - geo-FENNEL FCT1 Data Mode D'emploi

Technical data

Probe
Measuring principle
Measuring range
Accuracy
Resolution
Minimum curvature
Minimum measuring area
Basic thickness of material
Working temperature
Air humidity
Weight
Dimensions

INTENDED USE OF INSTRUMENT

• Non-destructive measurement of thickness of non-magnetic coatings on magnetic and non-magnetic
metals on the principles of magnetic induction or eddy current principle - with one probe only
• Saving of data and reading out the information stored after transferring to PC via USB port

CARE AND CLEANING

• Handle measuring instruments with care.
• Clean with soft cloth only after any use. If necessary damp cloth with some water.
• If instrument is wet clean and dry it carefully. Pack it up only if it is perfectly dry.
• Transport in original container / case only.
F
(magnetic/ferrous
metals)
Magnetic induction
0 - 1250 μm
0 - 49,21 mils
0 - 850 μm (±3 % + 1 μm)
850 - 1250 μm (±5 %)
0 - 33,46 mils
(±3 % + 0,039 mils)
33,46 - 49,21 mils (±5 %)
0 - 50 μm (0,1 μm)
50 - 850 μm (1 μm)
850 - 1250 μm (0,01 mm)
0-1,968 mils (0,001 mils)
1,968 - 33,46 mils (0,01 mils)
33,46 - 49,21 mils (0,1 mils)
1,5 mm
Ø 7 mm
0,5 mm
0°C - 40°C
(32°F - 104°C)
20 % - 90 %
110 Gr.
113,5 x 54 x 27 mm
N
(non-magnetic/-ferrous
metals)
Eddy current
0 - 1250 μm
0 - 49,21 mils
0 - 850 μm (±3 % + 1,5 μm)
850 - 1250 μm (±5 %)
0 - 33,46 mils
(±3 % + 0,059 mils)
33,46 - 49,21 mils (±5 %)
0 - 50 μm (0,1 μm)
50 - 850 μm (1 μm)
850 - 1250 μm (0,01 mm)
0-1,968 mils (0,001 mils)
1,968 - 33,46 mils (0,01 mils)
33,46 - 49,21 mils (0,1 mils)
3 mm
Ø 5 mm
0,3 mm
0°C - 40°C
(32°F - 104°C)
20 % - 90 %
110 Gr.
113,5 x 54 x 27 mm
EN
C
D
17