Indoor Installation Guideline; Installing The Mounting Plate - Daikin CTX07AXVJU Manuel D'installation

INDOOR INSTALLATION GUIDELINE

1
• The mounting plate should be installed on a wall which
can support the weight of the indoor unit.
1) Temporarily secure the mounting plate to the wall,
make sure that the panel is completely level, and mark
the drilling points on the wall.
2) Secure the mounting plate to the wall with screws of
size #8 x 1" (M4 x 25mm).
INDOOR UNIT CTX07/09/12
 Recommended mounting plate
retention spots (7 spots in all)
Dimension
Model
30-5/16
07/09/12

INSTALLING THE MOUNTING PLATE

Place a leveler on these tabs.
D
Ø 2-9/16
(65)
F H
A B C
9-1/2 1-13/16
(770) (241.6) (46.4)
Recommended mounting plate retention
spots and dimensions
Mounting plate
Ø 2-9/16
(65)
H
I
A
D E
4-5/8 4-9/16 1-15/16
(117) (116.5)
1-8
The mounting plate
should be installed
on a wall which can
support the weight of
the indoor unit.
Mounting plate
fixing screw
Use a tape measure as shown.
Position the end of the tape
measure at 
E
Through-the-wall
hole Ø 65mm
Drain hose
G
position
All dimensions are in inch (mm)
F G H
1-15/16 6-5/8
(49.5) (49.5) (170)
I
1-15/16
(50)