Honda WT20X Manuel De L'utilisateur page 45

Model
Power products
description code
Dimensions and Weight
Length
Width
Height
Dry mass [weight]
Engine
Model
Engine type
Displacement
×
[Bore Stroke]
Engine Net Power
(in accordance with SAE J1349 )
Engine Max. Net Torque
(in accordance with SAE J1349 )
Fuel tank capacity
Cooling system
Ignition system
PTO shaft rotation
Pump
Suction port diameter
Discharge port diameter
Maximum total head lift
Maximum suction head lift
Maximum discharge capacity
Priming time
＊
The power rating of the engine indicated in this document is the net
power output tested on a production engine for the engine model
and measured in accordance with SAE J1349 at 3,600 rpm (Engine
Net Power) and at 2,500 rpm (Engine Max. Net Torque). Mass
production engines may vary from this value.
Actual power output for the engine installed in the final machine will
vary depending on numerous factors, including the operating speed
of the engine in application, environmental conditions, maintenance,
and other variables.
42
WT30X
WAWJ
660 mm (26.0 in)
495 mm (19.5 in)
515 mm (20.3 in)
61 kg (134 lbs)
GX270T2
4-stroke, over head valve,1cylinder
270 cm (16.5 cu-in)
77.0
6.3 kW (8.6 PS)/3,600 rpm
＊
19.1 N·m (1.94 kgf·m, 14.1 lbf·ft)/2,500 rpm
＊
5.3 L (1.40 US gal, 1.17 lmp gal)
Forced air
CDI magneto
Counterclockwise
80 mm (3.1 in)
80 mm (3.1 in)
Minimum 25 m (82 ft)
Minimum 8 m (26 ft)
Minimum 1200 L
(317.0 US gal, 264 lmp gal)/min
Maximum 90 SEC/4.5 m (14.8 ft)
×
58.0 mm (3.03
×
2.28 in)