Control Panel And Features - Maytag MVWX700XL Guide D'utilisation Et D'entretien

CONTROL PANEL AND FEATURES

EST TIME REMAINING DISPLAY
1
The Estimated Time Remaining display shows the time
required for the cycle to complete. Factors such as load size
and water pressure may affect the time shown in the display.
Overloading, unbalanced loads, or excessive suds may
cause the washer to adjust the cycle time, as well.
WASH CYCLE KNOB
2
Use the Wash Cycle Knob to select available cycles on your
washer. Turn the knob to select a cycle for your laundry load.
See "Cycle Guide" for detailed descriptions of cycles.
LID LOCK
3
To allow for proper load sensing and spinning,
the lid will lock and the Lid Lock light will turn on.
This light indicates that the lid is locked and cannot
be opened.
If you need to open the lid, press Start/Pause/
Unlock. The lid will unlock once the washer
movement has stopped. This may take several
minutes if the load was spinning at high speed.
Press Start/Pause/Unlock again to resume
the cycle.
CYCLE MODIFIERS
4
When you select a cycle, its default modifiers will light up.
Not all cycles, options, and modifiers are available on all
models.
TEMP LEVEL
Temperature Control senses and maintains uniform water
temperatures by regulating incoming hot and cold water.
Select a wash temperature based on the type of fabric
and soils being washed. For best results and following
the garment label instructions, use the warmest wash
water safe for your fabric.
 •  W armandhotwatermaybecoolerthanwhatyour
previous washer provided.
• E veninaCoolwaterwash,somewarmwatermay
be added to the washer to maintain a minimum
temperature.
SOIL LEVEL
Soil level (wash time) is preset for each wash cycle. As
you press Soil Level, the cycle time (minutes) will increase
or decrease in the Estimated Time Remaining display and
a different wash time will appear.
For most loads, use the soil level that is preset with the
cycle you have chosen. For heavily soiled and sturdy
fabrics, press Soil Level to select more wash time, if
needed. For lightly soiled and delicate fabrics, press
Soil Level to select less wash time, if needed. Lower
soil level setting will help reduce tangling and wrinkling.
4
1 2
6
5
3
4
SPIN SPEED
This washer automatically selects the spin speed
based on the cycle selected. The preset speeds can
be changed. Not all spin speeds are available with
all cycles.
• F asterspinspeedsmeanshorterdrytimes,but
may increase wrinkling in your load.
• S lowerspinspeedsmeanlesswrinkling,butwill
leave your load more damp.
CYCLE OPTIONS
When you select a cycle, its default options will light up. Not
all cycles, options, and modifiers are available on all models.
PREWASH
Use this option to add an extra agitation and soak time
to the beginning of any cycle to break up tough stains.
FABRIC SOFTENER
This option must be selected if using fabric softener
during a cycle. It ensures that fabric softener is added
at the correct time in the rinse for even distribution.
EXTRA RINSE
This option can be used to automatically add a second
rinse to most cycles.
DEEP CLEAN
This option provides enhanced cleaning action for tough
stains. It will add additional agitation and soak time to
the cycle.
END SIGNAL
Use this option to adjust volume of the signal that sounds
at end of cycle. You may select Hi, Low, or Off (no
indicator lit). A louder signal is helpful in removing items
as soon as cycle is complete.
Button Sounds:
Press and hold End Signal for 3 seconds to turn the
button sounds on or off.
You may also add or remove options for each cycle. Not all
options can be used with all cycles, and some are preset to
work with certain cycles.
5