Pip Position - Oki B32A-FH Instructions D'utilisation

Note 1: Two different channels from the
Tuner can not be viewed in the PIP screen.
Only the broadcast from the external source
can be viewed in the PIP screen.
Note 2: Since the external sources such as
satellite receivers focus on single channel
and transmit it to the TV although they can
receive many channels, other channels that
are received by similar devices can not be
displayed on the POP screen.
Note 3: HDMI2 can not be selected in the
PIP screen when HDMI1 is displayed on the
main screen.
Note 4: Right and left movement buttons do
not control the volume in PIP, PAP and PAT
modes. They can only be used to change
the source.

7.4.3.1-PIP Position

With this option, you can change the display
position of the PIP screen. You can change
the position of the PIP screen in clockwise
by pressing the Pos button when there is a
PIP picture on the screen.
7.4.3.2-PIP Size
With this option, you can increase and
decrease the size of the PIP window. You
can change the PIP size by pressing the
Size button when there is a PIP picture on
the screen.
7.4.3.3-Switching the locations of
the Main screen and PIP screen
When a sub window is open in front of the
main window, you can switch the locations
of the main window and sub window by
pressing the SWAP button on your remote
control.
7.4.4-PAT Mode
With this feature, you can follow the
teletext broadcasts simultaneously with the
current program, provided that the current
program contains teletext broadcast. For
this purpose, when you press TXT and
then 16:9 buttons in a channel with teletext
broadcasting, the screen will be split into
two with the left pane showing the currently
watched program and the right pane will
show the Teletext at the same time. In the
event that you wish to exit the PAT mode for
any reason, simply press the 16:9 button.
22 I
EN