Maintenance And Inspection - Hitachi NR 83A5 Manuel D'instructions

NOTE:
● The nose cap may reduce nailing depth due to its
thickness. Re-adjustment of nailing depth is required.
Do not connect
1
air hose
NOTE: The information contained in this Manual is designed to assist you in the safe maintenance of the Nailer.
Some illustrations in this Manual may show details or attachments that diff er from those on your own Nailer.

MAINTENANCE AND INSPECTION

Read section titled "SAFETY" (pages 4 – 8).
● Disconnect air hose and remove all nails
from Nailer when:
1) doing maintenance and inspection; and
2) clearing a jam.
1. Clearing a jam
Remove a jammed nail in the following order:
1 DISCONNECT AIR HOSE.
2 Insert a rod into the outlet.
Tap the rod with a hammer.
Hammer
Rod
Outlet
Nose
Push Lever
Nose Cap
MAINTENANCE
WARNING
Disconnect
1
air hose
Nose cap can be removed from the push lever using a
screwdriver or thin rod.
Screwdriver
3 Remove the jammed nail with a slotted screw
driver.
4 In case of frequent jam, contact a Hitachi
authorized service center.
2. Inspecting the magazine
1 DISCONNECT AIR HOSE.
2 Clean the magazine. Remove plastic tips or
wooden tips which may have accumulated in the
magazine. Lubricate it with Hitachi pneumatic tool
lubricant.
<NR83A5 / NR83A5 (S)>
Magazine
English
Push lever
Nose cap
Nail Feeder
Disconnect
1
air hose
23