IWC Schaffhausen Aquatimer Split Minute Chronograph Mode D'emploi page 29

Adjusting the metal bracelet
The metal bracelet of your IWC watch can be readily adjusted to the size
of your wrist. You can make this adjustment yourself by removing or adding
individual bracelet links.
Taking the bracelet apart and removing individual links
Open the push-button release safety clasp by pressing
the button on the side. Lay the bracelet with its top
surface on a firm base. Using the special tools pro-
vided, you can now push down the securing pin (1) at
the desired point of separation and, at the same time,
displace the pivot pin laterally by about 3 mm (2) with
the second special tool.
Now pull the protruding pivot pin from the bracelet (3).
The metal bracelet is now separated, and you can
adjust the length of the bracelet by removing or adding
individual links.
26 | 27