Preparation - JVC KW-XG700 Manuel D'instructions

Preparation

Cancel the display demonstration and set the clock
• See also page 26.
~
Turn on the power.
Ÿ
Enter the PSM settings.
! ⁄
]
Cancel the display demonstrations
Select "DEMO," then "DEMO OFF."
Set the clock
Select "CLOCK H" (hour), then adjust the hour.
Select "CLOCK M" (minute), then adjust the minute.
@
Finish the procedure.
Caution on volume setting:
Digital devices (CD/USB) produce very little noise compared with other sources. Lower the volume before playing
these digital devices to avoid damaging the speakers by the sudden increase of the output level.
4 INTRODUCTIONS
When the power is turned off: Check the current clock time
When the power is turned on: Change the display information