Presentation; Technical Description - Satelec Acteon P5 Newtron Manuel D'utilisation

Masquer les pouces Voir aussi pour P5 Newtron:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 20
III - PRESENTATION

3. 1 PRESENTATION

The device is composed of three main parts:
- a control unit (Fig. 1-1)
- a footswitch (Fig. 1-2)
- a cord with a connector for the handpiece (Fig.
1-3)
The device control unit has a rotary
potentiometer on the top with the marking OI
(On/Off) and marked 1 to 20 (power levels).
Various connections are to be found at the rear of
the unit:
- 1 mains cord (fixed) (Fig. 2-1)
- 1 footswitch cord (fixed) (Fig. 2-2)
- 1 tube (Fig. 2-3), equipped with a filter system
(Fig. 2-4), for connecting to the water supply.
- 1 tap for adjusting the water flow (Fig. 2-5).
On the righthand side is located the scaler cord
(not detachable) with the connector for (Fig. 5-
4):
- a S
N
UPRASSON
EWTRON
or
- a S
N
UPRASSON
EWTRON
N
L
EWTRON
ED
There is a support located above the cord for the
handpiece connector.
handpiece for P5 N
L
light handpiece for P5
ED
There are air vents on the rear and lower panels
of the device.
In order to maximize air flow, the device rests on
4 rubber feet, keeping the lower air vents clear.
The accessories: S
S
UPRASSON
their own individual instructions manuals.

3. 2 TECHNICAL DESCRIPTION

a) Upper panel of the control unit
The rotary potentiometer (Fig. 3-1) on the top
panel is used for:
- starting and stopping the device: OI (Fig. 3-2)
- setting the ultrasonic power: 1 to 20
Its display is divided into 4 coloured sectors each
having 5 positions.
The power on indicator (Fig. 3-3) shows the
colour and no. of the chosen power setting:
- green: 1 to 9: very low to low power
- yellow: 6 to 14: medium power
- blue: 12 to 18: high power
- orange: 17 to 20: very high power
,
EWTRON
The technology built into this device enables the
practitioner to work at a constant amplitude,
depending on the power level selected and
compensating for the effort applied.
The use of a S
improves visibility of the operating field.
Note: the power level for using tips should be
selected in accordance with the instructions in
the T
IPBOOK
tips).
N
UPRASSON
EWTRON
N
L
handpiece and tips have
EWTRON
ED
N
UPRASSON
EWTRON
and the tip colour coding system (CCS
handpiece or
L
light handpiece
ED
7

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

P5 newtron led

Table des Matières