Husqvarna T 4000 Manuel D'utilisation page 8

Masquer les pouces Voir aussi pour T 4000:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

When cleaning and servicing the machine, you must switch off the machine and remove the plug from the outlet.
Avoid cleaning with a high pressure cleaner. If necessary, do not direct at the openings on the machine, especially
the opening for cooling air.
Before moving the machine from the work area, the machine must be cleaned.
All other equipment must be regarded as contaminated and be treated thereafter.
If possible, use a special suitable room.
Proper personnel protective equipment must be used. Dust can be spread when the coarse filter and the absolute
filter are replaced that can be hazardous to health. Accordingly, the user should wear protective glasses, protective
gloves, and a breathing mask conforming to protection class FFP3.
All parts which are contaminated after service must be properly disposed of in plastic bags according to
all regulations.
If the machine has to be used for other purposes, it is extremely important that the machine is cleaned,
to avoid the spread of hazardous dust.
Do not puncture the Hepa filter. Risk of dust dispersion.
590426101
590396101
590433801
590445701
590433701
590435901
Caution
The machine is for indoor use only & shall be stored indoors only
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been given supervision or instruction concerning use if the appliance
by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
All Husqvarna devices and accessories have a 12-month factory warranty for material and manufacturing defects. The
warranty extends to 36 months when returning the attached warranty slip. Do not attempt to repair the suction apparatus
without the consent of the manufacturer.
The warranty does not cover defects which are the result of normal wear and tear, negligence, defective use, unauthorised
repair or the suction apparatus being connected to the incorrect voltage.
In the event of any complaint, the suction apparatus or an agreed part of it must be returned to us or our authorised
representative for warranty examination and for any warranty repair or replacement.
Replacement parts, filters and dust collection system

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

T 7500T 10000

Table des Matières