Replacing The Battery [Dc Type]; Care And Cleaning - Toto TES100DA Manuel D'installation Et D'utilisation

1. Remove cover of battery case.
2. Install four (4) D size alkaline batteries.
NOTE: Make sure the batteries are
installed in correct orientation
(polarity).
3. Replace battery case cover.
4. Tighten screws.
● For Light Cleaning
Wipe away any debris
spout or sensor.
● For Heavy-Duty Cleaning
Wipe away debris with a damp cloth
containing a suitable amount of a neutral,
dishwashing detergent.
Then wipe clean with a damp cloth.
● When cleaning around the sensor,
please be careful not to scratch
the surface of the sensor window.
● Do not use detergent that might
the surface of spout.
These include:
● Detergents containing acid, chlorine
bleach or alkali.
● Detergents that are coarse granules in
nature, such as polishing powder.
● Solvents such as paint thinner or benzene.
● Abrasive aids such as nylon scrubbers/brushes,
steel wool, etc.

REPLACING THE BATTERY [DC Type]

CARE AND CLEANING

the
Battery
case cover
Screws
12
Battery
case
－
＋
＋
－
Batteries
Sensor window