Operating - Medisana FM 885 Mode D'emploi

GB

3 Operating

3.1
Foot
massage
3.2
Duration of
massage
treatment
16
Place the MEDISANA foot massager FM 885 on the floor in front of a
comfortable chair and plug the mains plug into the mains outlet.
1.
Power on the unit by switching on the ON/OFF button
comfortable position. The indicator light in the ON/OFFbutton
lights up in red. Put your feet under the cover.
2.
By switching the device on, the Shiatsu massage and the air pressure
massage are activated automatically. Air pressure massage is set to
medium intensity by default. The indicator light in the button
lights up in white.
3.
The heat may be switched on or off with the button
function is deactivated, the respective red indicator light goes out.
4.
The air pressuere massage may be switch between low (LOW), medium
(MED) and high (HIGH) intensity with the buttons
The indicator light of the activated button lights up in white. With button
(AIR OFF) air pressure massage can be deacitvated separately.
5.
Press the the ON/OFF button
wait until the device switches off automatically.
(After 15 minutes of constant use the device will switch off automatically.)
Pull your feet out of the cover before you get up.
The appliance is not designed to support your full body weight!
Unplug the appliance from the wall outlet after use.
In general, you can allow approximately 10 to 15 minutes operation for
each massage session, one to two times a day. Make sure the appliance is
cooled down completely before using it again!
3 4 5
1
to switch off the device completely or
1
. Sit down in a
1
4
(MED)
6
. When the heat
.
2