Cleaning The Condenser - Zephyr PRB24C01AS-OD Guide D'utilisation, D'entretien Et D'installation

Masquer les pouces Voir aussi pour PRB24C01AS-OD:

Table des Matières

Les langues disponibles

Care and Maintenance

ZEPHYRONLINE.COM

Cleaning the Condenser

To maintain operational efficiency, keep the front grille free of dust and lint. Clean the condenser

when necessary. Depending on environmental conditions, more or less frequent cleaning may be

necessary. Do not use any type of cleaner on the condenser unit. The condenser may be cleaned

using a vacuum, soft brush, or compressed air.

NOTE: It is recommended to clean the condenser at least once every six months.

WARNING

Disconnect the electrical plug of the unit before cleaning the

condenser.

1. Remove the front grille.

2. Clean the condenser coil using a vacuum, soft brush, or compressed air.

3. Install the front grille.

PRB24C01AS-OD Use, Care, and Installation Guide

Table des Matières

Table des Matières